If you ride an ATV, UTV, side-by-side, or snowmobile in Alaska, you need a registration decal issued by the Alaska Department of Fish and Game and applied where it can be read from a distance. This guide covers placement, sizing, replacement options, and how to keep your decal legible through extreme cold weather vinyl performance and long winter darkness.
Who Must Register
The Alaska Department of Fish and Game regulates registration of ATVs, UTVs, off-highway motorcycles, and snowmobiles operated on public lands or trails in Alaska. Machines used purely on private land may be exempt, but most public trail systems require a current registration decal to ride.
Out-of-state riders typically need a non-resident permit; check current Alaska Department of Fish and Game guidance before towing your machine into Alaska.
Decal Placement
Alaska riders should place the registration decal where it can be read from each side of the machine. Standard locations:
- ATV / UTV: front fender, fuel tank, or rear cargo area, both sides if the agency requires
- Snowmobile: tunnel side or hood, both sides, clear of articulating panels
- Off-road motorcycle: number-plate area or front fender
Surface prep matters: clean with isopropyl alcohol, dry fully, and apply at room temperature. A decal applied to a cold tank in extreme cold and long winter darkness is the #1 reason riders re-order mid-season.
Size & Visibility
| Machine | Recommended sticker height | Vinyl |
|---|---|---|
| ATV / UTV | 2″β3″ character height | 6-mil cast w/ laminate |
| Snowmobile | 2″β3″ | 6-mil cast w/ laminate |
| Off-road motorcycle | 2″ | 6-mil cast w/ laminate |
Replacement & Custom ID Stickers
If the Alaska Department of Fish and Game-issued decal peels or fades, request a duplicate from the agency, only the Alaska Department of Fish and Game can re-issue the registration number itself. For custom identification stickers (rider name, blood type, emergency contact, hull/registration number reprinted in larger letters), Hoosier Decal can print durable cast vs calendered vinyl that handles extreme cold and long winter darkness.
Vinyl That Survives the Trail
Mud, pressure washing, gas spills, and extreme cold and long winter darkness are the four biggest reasons stickers fail. Premium 6-mil cast vinyl with a vinyl fading from sun laminate beats standard calendared vinyl by 2β3 seasons on the same machine.
Frequently Asked Questions
Where do I put my ATV registration decal in Alaska?
Most Alaska ATVs require the registration decal on a clean, flat, vertical surface visible from each side; typically the front fender or fuel tank. Confirm exact placement with the Alaska Department of Fish and Game for your machine class.
Do I need a new decal each year in Alaska?
Most Alaska ATV and snowmobile registrations renew on a multi-year cycle, with a fresh decal issued at each renewal. Check your renewal notice for the specific term.
Can I make a replacement registration decal myself?
No. Only the Alaska Department of Fish and Game can issue valid registration numbers and decals. We can, however, print durable replacement identification stickers (your registration number, name, contact) that survive extreme cold and long winter darkness better than the standard issued sticker.
What vinyl holds up best on an ATV in Alaska?
Premium 6-mil cast vinyl with a UV laminate is the best match for extreme cold and long winter darkness, mud, and pressure washing. Calendared 3-mil vinyl is fine for one or two seasons.
Order Alaska ATV / Snowmobile Stickers
Hoosier Decal prints custom ID stickers, registration-number reprints, and trailer numbers on the same 6-year outdoor vinyl we ship to commercial fleets. Use our designer to set your number, name, and color.
