Georgia commercial fleets must follow FMCSA 49 CFR 390.21 door-marking rules plus any state-specific intrastate add-ons. This guide explains what has to appear on the door, how big it has to be, where to place it, and how the Georgia Department of Public Safety (Motor Carrier Compliance Division) treats violations on the road.
What Must Appear on the Door
FMCSA 390.21 requires every commercial motor vehicle in interstate commerce to display, on both sides of the power unit:
- Legal name of the motor carrier (or DBA on file with FMCSA)
- USDOT number in the form
USDOT 1234567 - If applicable, an MC/MX number for for-hire authority
Some Georgia carriers (passenger, hazmat, or specialty) may also need additional markings under their operating-authority rules, verify with your authority issuer or the Georgia Department of Public Safety (Motor Carrier Compliance Division).
Size, Font, and Contrast
The federal minimum is 2 inches tall, but cleaner fleet practice is 3 inches:
| Detail | FMCSA minimum | Georgia fleet best practice |
|---|---|---|
| Letter height | 2 inches | 3 inches |
| Contrast | Sharply contrast vehicle | White on dark / black on light |
| Font weight | “Clearly legible” | Bold sans-serif (Helvetica, Arial Black) |
| Visibility | 50 feet daylight | 50+ feet, including dusk |
Placement on the Power Unit
Markings go on the driver door and passenger door of the power unit. Trailer-only placement does not satisfy 390.21. Georgia inspectors regularly cite carriers who place markings on:
- Side glass instead of door panels
- Rear panels or tailgates
- Behind handles or trim that blocks readability
Georgia Intrastate Add-Ons
If you operate exclusively within Georgia, your operating authority may come from the state rather than FMCSA. Confirm with the Georgia Department of Public Safety (Motor Carrier Compliance Division) whether your intrastate fleet must show:
- A Georgia motor-carrier number alongside (or in place of) USDOT
- The carrier’s city of principal operation
- Hazmat or for-hire passenger placards under state-specific rules
Georgia-issued numbers are usually still subject to the same 2-inch minimum letter height as USDOT markings.
Enforcement & Penalties
The Georgia Department of Public Safety (Motor Carrier Compliance Division) runs roadside inspections, weigh-station stops, and Level III credential checks. A door-marking violation can:
- Trigger a fix-it ticket with a re-inspection requirement
- Result in an out-of-service order if combined with paperwork issues
- Show up on your CSA score and raise insurance rates
FMCSA’s federal civil penalty for a 390.21 violation tops out at $1,496 per day (2026 rate).
Frequently Asked Questions
Are pickup trucks subject to door-marking laws in Georgia?
Pickups used in interstate commerce above the GVWR/GCWR thresholds in 49 CFR 390.5 must display USDOT markings. Georgia pickups used purely for personal or non-commercial purposes are not subject to FMCSA door-marking rules.
Does the company name have to appear with the USDOT number?
Yes. FMCSA 390.21 requires the legal name (or DBA on file with FMCSA) to appear with the USDOT number on both sides of the power unit.
How big do letters need to be on a Georgia commercial truck?
The federal minimum is 2 inches, with sharp contrast and readability from 50 feet. Most Georgia fleets use 3-inch letters for durability and roadside clarity.
Who enforces door-marking laws in Georgia?
The Georgia Department of Public Safety (Motor Carrier Compliance Division) handles roadside enforcement at weigh stations and during traffic stops. FMCSA federal investigators conduct compliance reviews independently of state stops.
Order Georgia Commercial Door Decals
Hoosier Decal ships compliant USDOT and company-name door decals nationwide. Premium 6-year outdoor vinyl handles humid Southern climate without curl or fade.
