If you ride an ATV, UTV, side-by-side, or snowmobile in New Hampshire, you need a registration decal issued by the New Hampshire Fish and Game Department and applied where it can be read from a distance. This guide covers placement, sizing, replacement options, and how to keep your decal legible through cold New England winters and road salt.
Who Must Register
The New Hampshire Fish and Game Department regulates registration of ATVs, UTVs, off-highway motorcycles, and snowmobiles operated on public lands or trails in New Hampshire. Machines used purely on private land may be exempt, but most public trail systems require a current registration decal to ride.
Out-of-state riders typically need a non-resident permit; check current New Hampshire Fish and Game Department guidance before towing your machine into New Hampshire.
Decal Placement
New Hampshire riders should place the registration decal where it can be read from each side of the machine. Standard locations:
- ATV / UTV: front fender, fuel tank, or rear cargo area, both sides if the agency requires
- Snowmobile: tunnel side or hood, both sides, clear of articulating panels
- Off-road motorcycle: number-plate area or front fender
Surface prep matters: clean with isopropyl alcohol, dry fully, and apply at room temperature. A decal applied to a cold tank in cold New England winters and road salt is the #1 reason riders re-order mid-season.
Size & Visibility
| Machine | Recommended sticker height | Vinyl |
|---|---|---|
| ATV / UTV | 2″–3″ character height | 6-mil cast w/ laminate |
| Snowmobile | 2″–3″ | 6-mil cast w/ laminate |
| Off-road motorcycle | 2″ | 6-mil cast w/ laminate |
Replacement & Custom ID Stickers
If the New Hampshire Fish and Game Department-issued decal peels or fades, request a duplicate from the agency, only the New Hampshire Fish and Game Department can re-issue the registration number itself. For custom identification stickers (rider name, blood type, emergency contact, hull/registration number reprinted in larger letters), Hoosier Decal can print durable vinyl that handles cold New England winters and road salt.
Vinyl That Survives the Trail
Mud, pressure washing, gas spills, and cold New England winters and road salt are the four biggest reasons stickers fail. Premium 6-mil cast vinyl with a UV laminate beats standard calendared vinyl by 2–3 seasons on the same machine.
Frequently Asked Questions
Where do I put my ATV registration decal in New Hampshire?
Most New Hampshire ATVs require the registration decal on a clean, flat, vertical surface visible from each side, typically the front fender or fuel tank. Confirm exact placement with the New Hampshire Fish and Game Department for your machine class.
Do I need a new decal each year in New Hampshire?
Most New Hampshire ATV and snowmobile registrations renew on a multi-year cycle, with a fresh decal issued at each renewal. Check your renewal notice for the specific term.
Can I make a replacement registration decal myself?
No. Only the New Hampshire Fish and Game Department can issue valid registration numbers and decals. We can, however, print durable replacement identification stickers (your registration number, name, contact) that survive cold New England winters and road salt better than the standard issued sticker.
What vinyl holds up best on an ATV in New Hampshire?
Premium 6-mil cast vinyl with a UV laminate is the best match for cold New England winters and road salt, mud, and pressure washing. Calendared 3-mil vinyl is fine for one or two seasons.
Order New Hampshire ATV / Snowmobile Stickers
Hoosier Decal prints custom ID stickers, registration-number reprints, and trailer numbers on the same 6-year outdoor vinyl we ship to commercial fleets. Use our designer to set your number, name, and color.
