If you ride an ATV, UTV, side-by-side, or snowmobile in Arkansas, you need a registration decal issued by the Arkansas Game and Fish Commission and applied where it can be read from a distance. This guide covers placement, sizing, replacement options, and how to keep your decal legible through humid summers and mild winters.
Who Must Register
The Arkansas Game and Fish Commission regulates registration of ATVs, UTVs, off-highway motorcycles, and snowmobiles operated on public lands or trails in Arkansas. Machines used purely on private land may be exempt, but most public trail systems require a current registration decal to ride.
Out-of-state riders typically need a non-resident permit; check current Arkansas Game and Fish Commission guidance before towing your machine into Arkansas.
Decal Placement
Arkansas riders should place the registration decal where it can be read from each side of the machine. Standard locations:
- ATV / UTV: front fender, fuel tank, or rear cargo area, both sides if the agency requires
- Snowmobile: tunnel side or hood, both sides, clear of articulating panels
- Off-road motorcycle: number-plate area or front fender
Surface prep matters: clean with isopropyl alcohol, dry fully, and apply at room temperature. A decal applied to a cold tank in humid summers and mild winters is the #1 reason riders re-order mid-season.
Size & Visibility
| Machine | Recommended sticker height | Vinyl |
|---|---|---|
| ATV / UTV | 2″β3″ character height | 6-mil cast w/ laminate |
| Snowmobile | 2″β3″ | 6-mil cast w/ laminate |
| Off-road motorcycle | 2″ | 6-mil cast w/ laminate |
Replacement & Custom ID Stickers
If the Arkansas Game and Fish Commission-issued decal peels or fades, request a duplicate from the agency, only the Arkansas Game and Fish Commission can re-issue the registration number itself. For custom identification stickers (rider name, blood type, emergency contact, hull/registration number reprinted in larger letters), Hoosier Decal can print durable vinyl that handles humid summers and mild winters.
Vinyl That Survives the Trail
Mud, pressure washing, gas spills, and humid summers and mild winters are the four biggest reasons stickers fail. Premium 6-mil cast vinyl with a UV laminate beats standard calendared vinyl by 2β3 seasons on the same machine.
Frequently Asked Questions
Where do I put my ATV registration decal in Arkansas?
Most Arkansas ATVs require the registration decal on a clean, flat, vertical surface visible from each side; typically the front fender or fuel tank. Confirm exact placement with the Arkansas Game and Fish Commission for your machine class.
Do I need a new decal each year in Arkansas?
Most Arkansas ATV and snowmobile registrations renew on a multi-year cycle, with a fresh decal issued at each renewal. Check your renewal notice for the specific term.
Can I make a replacement registration decal myself?
No. Only the Arkansas Game and Fish Commission can issue valid registration numbers and decals. We can, however, print durable replacement identification stickers (your registration number, name, contact) that survive humid summers and mild winters better than the standard issued sticker.
What vinyl holds up best on an ATV in Arkansas?
Premium 6-mil cast vinyl with a UV laminate is the best match for humid summers and mild winters, mud, and pressure washing. Calendared 3-mil vinyl is fine for one or two seasons.
Order Arkansas ATV / Snowmobile Stickers
Hoosier Decal prints custom ID stickers, registration-number reprints, and trailer numbers on the same 6-year outdoor vinyl we ship to commercial fleets. Use our designer to set your number, name, and color.
